Deluxe TOURING PACKAGE - Fully Loaded

from $40,252 incl GST

Maximum capability, fully loaded — built for serious touring from the outset.

The canopy includes a flush floor, completely reinforced frame, two slam locks that are central locking compatible, large rubber seals and lift-off points, with full length drop sides. A ladder is bolted to the back of the canopy for easy access to the canopy roof, and a roof platform is installed.

The Fully Loaded setup builds on this by integrating a complete touring system, including a rooftop tent and 270° awning mounted to the canopy, along with an internal canopy fit-out featuring a draw and table combination with a dedicated fridge space and dividing wall. An upright fridge/freezer and a complete 12V power system with a 200Ah lithium battery are also mounted within the canopy, creating a practical and self-sufficient setup for extended trips.

Maximum water storage capacity is included with a 65L undertray poly water tank, in addition to a 30L headboard poly water tank plumbed to a brass tap and mounted to the front of the mudguard.

A spare tyre holder is installed to the back of the canopy (to suit up to a 35” tyre), and a 20L jerrycan holder is also included, with a folding design for low loading height.

Trays are made from a 4mm checker plate base, 4mm RHS reinforcing frame, 6mm stringers, and 10mm mounts.

The headboard infill is a CNC cut panel with a hexagon pattern bolted into the headboard to protect the rear glass.

To complete the build, all key external components are colour coded to match your vehicle, including the drop sides, undertray toolbox doors and canopy doors, with plate capping added to the top of the drop sides to protect high-wear areas and maintain a clean, premium finish.

STANDARD PAckage Includes:

  • HeavY dUTY Aluminium tRAY

  • 3” Tubed headboard;

  • Mudguards (one piece flared);

  • Mudflaps

  • Removal tray sides;

  • Under tray toolboxes (pair);

  • 1000mm trundle draw;

  • 38541 SERIES MAXILAMPS;

  • HEADBOARD INFILL (MESH);

  • 65L undertray Poly water tank;

  • 30L headboard Poly water tank;

  • Scallywag 1500mm canopy;

  • Scallywag Canopy Ladder;

  • Scallywag Canopy Roof Platform;

  • Spare tyre holder; and

  • 20L Jerrycan holder.

Fully LOaded Extras Includes:

Overall Dimensions

Dual Cab | 1780mm long x 1830mm width

Space Cab | 2050mm long x 1830mm width

Single Cab | 2400mm long x 1830mm width

American Pick-up (SWB) | 2000mm long x 2050mm width

American Pick-up (LWB) | 2400mm long x 2050mm width

Please note, removal of basic tub, fitting of tray and relocation of OME camera and sensors are included. Removal of after-market accessories from tub may incur an extra cost.

Coffee Hops

Photography | Design | Websites

https://www.coffeeandhops.com
Next
Next

Premium Heavy Duty Ute Tray PACKAGE